Boatsense revisited, works good


Hot and humid in Maine, a good chance to hang in the lab with the Boatsense Solutions remote monitoring system I’ve been meaning to test further and photograph. Today I learned to program it so it will send the particular message you might want depending on the particular sensors you’ve hooked to the three auxiliary inputs. You have to get the syntax right, but once I sent the text message “#AM3Intruder!” to the monitor’s phone number, then broke the connection between the Aux #3 wire and ground, the unit called me with the “Intruder!” message above.

Auxiliary 3 is meant for on-until-alarm sensors like a magnetic door minder. The other two are meant for standard off-until-alarm sensors like, say, an engine room temperature alarm (right). Boatsense_TestScreen_cPanboI also simulated a high bilge alarm. It, and the battery monitoring built in, are nice in that they return a different message—like “Bilge Water Normal”—when the sensor resets to its normal state. The Auxiliaries just send the same message when reset, like “Intruder!” when the door is closed (you’ll need a switch on that sensor for when you use the boat’s door yourself). Not a biggie. And, by the way, most alarms rang my phone in less than one minute. Nice.

Similar Posts:

Reporter Wireless, catch a thief
August 13, 2007

Boatsense, hip hip for the home team
May 25, 2007

May 14, 2004

Krill Systems, monitoring for the rest of us?
August 9, 2006

Ben Ellison

Ben Ellison

Panbo editor, publisher & chief bottlewasher from 4/2005 until 8/2018, and now excited to have Ben Stein as very able publisher, webmaster, and editing colleague. Panbo is going to the next level in 2019 and beyond.

Join the conversation

Your email address will not be published.