Wireless data appliances: Comar NMEA-2-WiFi & DY AIS LifeGuard

Comar_NMEA-2-WiFi.jpg

The London Boat Show opened today and so far I’ve learned of two products being introduced there. It’s somewhat odd that while both say “AIS” on the box neither is an AIS receiver or transponder. Certainly the Comar NMEA-2-WiFi box might be used to send AIS target info to apps like iNavX running on an iPad — and given that Comar is all about AIS, it’s likely — but in fact its two NMEA 0183 inputs could be used for any data a user wants. Having two 0183 inputs, incidentally, is what seems to distinguish Comar’s product from Digital Yacht’s single input WLN boxes (though worth noting that the Brookhouse iMux has 4 inputs). Meanwhile DY came up with an entirely novel AIS-related data appliance…

The Digital Yacht AIS LifeSaver is specifically designed to solve a problem with the new AIS SARTs that are being used outside the U.S. now, and will soon be available in the States. (I say that hopefully, as the hold up is regulatory.)  As I found when I first tested the easyRescue personal AIS SART, many AIS plotting devices aren’t yet programmed to treat a SART target with proper seriousness (though it turned out later that the Raymarine E Wide did well). At any rate, as Nic Heyes explains in this DY video, the LifeGuard box simply listens to a NMEA 0183 AIS stream and sets off an internal 95db alarm and flashes a red warning light if it sees the SART message. It also has a relay that might be used for a bigger alarm or to send an MOB alert to certain autopilots or other gear.
   While the AIS LifeGuard could be really useful on some boats right now, hopefully it will become unnecessary as MFD manufacturers adapt their gear to AIS SARTs. And the same may be eventually true of all the new devices designed to get boat data into mobile apps, though I’m definitely looking forward to Lab testing the DMK and Chetco boat-to-apps bridges this cold weekend in Maine. It would be nice, though, if Panbots in London let us know about any other new electronics seen at the show.

Digital_Yacht_AIS_LifeGuard_video_clip.jpg

Similar Posts:


easyRescue personal AIS SART, hands-on #1
May 6, 2011

Kannad R10 AIS MoB beacon gets FCC approval, but not easily!
April 26, 2012

AIS MOB devices, we’re in the learning phase!
June 13, 2012

AIS SART plotting, & NMEA 2000 AIS problems
May 10, 2011



Ben Ellison

Ben Ellison

Panbo editor, publisher & chief bottlewasher from 4/2005 until 8/2018, and now excited to have Ben Stein as very able publisher, webmaster, and editing colleague. Panbo is going to the next level in 2019 and beyond.

6 Responses

  1. GPSNavX says:

    I can imagine the “AIS” naming is only because one of the input ports is 38,400 which is typical of AIS receivers. It will be interesting to see if the Comar WiFi mix supports infrastructure mode in addition to the typical Ad Hoc mode.
    The Comar WiFi should work fine with iNavX and MacENC. In the case of MacENC one could have a wired connection using the NMEA out to the Mac and then a WiFi connection to iNavX on iPad/iPhone.
    I think Chetco SeaSmart have done things the best because they support both Ad Hoc and Infrastructure mode and an easy to use web interface for configuration. This is something all the other WiFi mux seem to lack. Also SeaSmart have been very receptive to feature suggestions.

  2. Jeffrey says:

    Understanding what it does the “Name” is IMHO totally misleading. I recently installed the Brookhouse iMux (nothing to do with SART) so I would have WiFi of most of the data on board sent to iPad2 with iNavx. Dock side testing showes all works well and will be giving this and some other new equipmenet on board such as the B&G Triton T41 with serial number “1” a real workout next week during the Lauderdale to Key West race…Will post findings following that 160 mile race plus the trip up to Fort Lauderdale from home port in Coconut Grove, (Miami) Florida.

  3. Ben Ellison Ben Ellison says:

    The big “AIS” in a circle on the Comar seems to be their trademark, hence my “Comar is all about AIS” link:
    http://www.comarsystems.com/

  4. sv Haven says:

    Is there any hope for my E80 (not wide) ever displaying AIS SART messages and setting off an alarm?

  5. Ben, you might consider including the Brookhouse iMux in your lab test as well – although it lacks infrastructure mode, it is otherwise a pretty full-featured Wi-Fi multiplexer… and the email support from the fellow at Brookhouse is nothing short of outstanding.

  6. Vaibhao Deo says:

    Dear Sir,
    Good Day,
    Dear sir i want to configure comar wifi multiflexer with
    wifi furuno Radar DRS4W with nobeltec time zero software
    how should i connect it. please tell me in detail.
    Thanks

Join the conversation

Your email address will not be published.