2 new “standalone” 7-inch MFDs: Simrad Go7 and B&G Vulcan V7

Ben Ellison

Ben Ellison

Panbo editor, publisher & chief bottlewasher from 4/2005 until 8/2018, and now excited to have Ben Stein as very able publisher, webmaster, and editing colleague. Panbo is going to the next level in 2019 and beyond.

30 Responses

  1. First impressions are good, apart from the lack of radar support. Page 88 of the Operator manual shows a nice user interface to support making DSC calls to an AIS target over NMEA 2000, complete with a change channel option. Not only that, it uses the standard N2K PGN 129808 so it works across brands.
    NMEA 2000 using standard connectors and no NMEA 0183 connections!

  2. Dan Corcoran (b393capt) says:

    Wow. I predict that B&G Vulcan will be a big draw for sailors. The sail specific functionality is very attractive, and the lack of radar support won’t be an issue for most.(Although, I suppose radar and sirius weather could be added via WiFi ?)

  3. Ben Ellison Ben Ellison says:

    This was a very interesting — and maybe unresolved — conversation about direct DSC calls to AIS targets using NMEA 2000, but it’s way off the topic of Go7 and V7 “standalone” MFDs so I moved it to the Forum:
    https://staging.panbo.com/forum/2015/04/direct-dsc-vhf-calls-to-ais-targets-a-nmea-2000-standard.html

  4. mark says:

    hi, wondering if forward scan would would with unit?

  5. Ben Ellison Ben Ellison says:

    Good question, Mark, and one I meant to address.
    But the answer I’m afraid is NO.
    Navico told me that the Go7 and Vulcan V7 support “any Simrad/B&G blue 7-pin connector transducer” which does not include the black 9-pin StructureScan and ForwardScan transducers.
    It’s a little confusing because normally DownScan comes with StructureScan over the 9-pin port but Navico has some special HDI transducers that can do both CHIRP sonar and DownScan over the 7-pin cable. Here’s an example of the Go7 bundled with an HDI transom ducer for $849:
    http://www.starmarinedepot.com/simrad-go7-7%22-multi-touch-chartplotter-with-hdi-transducer/psm1100-015.html

  6. Kees says:

    Dan brings up an interesting point. These little fellows have WiFi built in, so if you have your existing MFDs on a WiFi network then maybe they would do chart/sonar sharing, and even radar in a pinch?
    That would be interesting to test if someone gets their hand on one and can put it in a bigger network. I’m looking at you here, Ben!

  7. Dan Corcoran (b393capt) says:

    Actually, what i was thinking, is if Simrad offered a radar with built in wi-fi output like Furuno’s …
    https://staging.panbo.com/archives/2014/12/nobeltec_timezero_app_2015_furuno_drs4w_wifi_radar_overlay_more.html
    .. then the Go7 and Vulcan V7, could become fully capable chartplotters with radar, despite not having an ethernet port.

  8. Markus says:

    I will upgrade my Silva Star log, sonar and wind instruments to models that output NMEA data. Instead of buying two B&G triton displays I am now considering getting one Vulcan. I already have a Zeus Touch plotter installed on my boat.

  9. xavier Itzmann says:

    So, does the Vulcan come with any charts built-in?
    If so, I’ll be buying the European version of it as soon as we make landfall in Ireland in about five weeks from today.

  10. Ben Ellison Ben Ellison says:

    Xavier, here’s the word on SKU’s (stock keeping units) from Navico:
    “GO7 is $799.00 in the SKU with no transducer included. GO7 has two other SKUs, one with the HDI 83/200/455/800 kHz transom transducer at $849.00 and the last SKU also includes the Navionics+ (formerly “Gold”) mapping card and a HDI 83/200/455/800 kHz transom transducer at $949.00. Vulcan 7 has only one SKU, it is with no transducer included and like GO7 is $799.”
    So the Vulcan V7 comes chartless, but you’ll sure have a lot to choose from. Check out the GoFree Shop:
    https://www.gofreeshop.com/

  11. RP says:

    “Sailors will like the V7’s maximum 1 amp current draw (at 13.6v with sonar off)”
    Is that good ? Garmin 721 draw 0.6A

  12. Ben Ellison Ben Ellison says:

    RP, where did you get a “0.6A” draw for a Garmin 721?
    Here’s what Garmin says:
    “Max power usage at 10 Vdc: 27 W
    Typical current draw at 12 Vdc: 1.3 A
    Max current draw at 12 Vdc: 2.3 A”
    https://buy.garmin.com/en-GB/GB/marine/chartplotters/gpsmap-721/prod119864.html

  13. RP says:

    Strömförbrukning: 0,6 A vid 12 V; 0,3 A vid 24 V
    0,8 A vid 12 V; 0,4 A vid 24 V (med ekolod)
    All swedish web marine shop say 0.6A
    I have also read test that say 0.6A
    Maybe someone here Who owns a garmin 721 know?
    But perheps vulcan typical draw 0.6A also and Max 1A ???

  14. I looked at the Swedish Garmin web pages for the 721 — those specs are not for the 721. Thanks to Google, I did find a match on that website, but it was for the GPSMAP 527, a smaller unit with a black and white screen (and about which the US Garmin website has no information).

  15. Ben Ellison Ben Ellison says:

    Thanks, Norse, but here’s the Garmin 527 product page… http://goo.gl/QqdEa3 …and it doesn’t seem relevant.
    There’s definitely something being lost in translation, though, and I tend to believe that Garmin’s 721 power specifications in English are correct. The good thing is that I can test next week on 741 with sonar off. Let’s please let it go until then.

  16. Christian says:

    Is it possible to integrate a B&G Vulcan Plotter into a Raymarine SeatalkNG Backbone with Log, Speed and temp, Wind sensors (Tridata package) connected to an Raymarine i70 ?
    I found out that Raymarine sells an adapter cable to convert the SeatalkNG to NMEA2000. So hardware connectivity should not be an issue. What about the functionality on the software side. Will the Vulcan display the laylines based on the sensors of the Raymarine Tridata package ?
    Who has tested this already ?

  17. Tom says:

    This will work just fine. Seatalk NG is just Ryamarine’s NMEA2000 cabling. I guess the only thing that might be different is some of the calibration? But you can do that from the i70 I guess

  18. Anonymous says:

    Thinking about these on both sides of the wheel, in addition to Zeus2 and PC in the Nav, 2xGraphic displays, 4×20/20’s on the maat, H5000 Hercules. Only thing is the lack of Ethernet and chart replication, need to buy charts for each unit…

  19. Anonymous says:

    Great info, thanks!
    How does the Vulcan 7 software account for different types of sailing vessels, ex. catboat, gaff rigged sloop, & etc. ?

  20. Will says:

    Wondered if one can rotate the screen, i.o.t make vertical installation on the side of a pedestal and display numerical data/info on top of each? Or display the chart vertically (like ipad screen)?

  21. Grotty Yachty says:

    I Installed the Vulcan inside the wheelhouse of my Motorsailer where it is nice and safe, and planned to use my Ipad,in a lifeproof case mounted at the outdoor helm.. I have done this, but it is not the ideal set up I hoped it would be…. prior to installing the Vulcan I have been using the ipad for a while, with Navionics App and have fallen in love with having so much information at the helm. Since the GO Free is Wifi, once connected the ipad no longer has 4G access, therefore it is real effort if you want to use the ipad to check the weather/tides or anything else, would have been much better if it connected via BLUETOOTH.
    So,the APP itself, has a few shortcomings. First thing I noticed, is that it only works in Landscape, not Portrait, which is my preference….. but hey that’s a personal preference.(the Vulcan only works in Landscape)
    A big drawback, is that every time you switch between Apps, you have to reconnect to the Vulcan, since it disconnects as soon as you move to another App.
    Navico, made the decision that you cannot control the Autopilot from the ipad…. and that’s their prerogative, but I don’t understand why?…. it would be SOO much better if you could….. I thought I had got around this by installing the WR10 wireless remote control…. and I have to an extent, but the WR10 is limited to 2 modes, heading hold and wind mode, the Autopilot has a host of other modes, but you have to go to the Vulcan itself to activate them…. most noticeably NAV mode.
    The Ipad replicates exactly what is on the VULCAN display, and whatever you change on the ipad display, will change on the Vulcan….. so you cannot use the Ipad, as an extra display to show a different Screen from the Vulcan, I guess that’s what it is for, but I think it’s a wasted opportunity.
    Most Frustratingly of all, since you are not allowed to operate the Autopilot from the ipad, any time you access a screen that controls the Autopilot, it just Locks up… you can’t even leave that screen, until you go back to the Vulcan, it takes a while to work out exactly what will lock it all up, since you can lock it up from various screens, not just by selecting the Autopilot Screen.
    It was a long shot, but I was hoping the Go-Free network would be Wi-fiing the NMEA sentences that could be used by third party APPS, but alas no.
    SO overall, the Go-Free App is Good, but it could be EXCELLENT with a few changes. I think I will be moving the Vulcan to the outside Helm position, and keeping the ipad there too……

  22. It looks like B&G might have discontinued the Vulcan line, or at least they might be getting ready to come out with something new and not promoting it anymore. I went into a local West Marine to purchase one, and they don’t have any more stock, have notes from B&G to remove store models, and have discontinued it in West Marine inventory. That’s usually a sign of something going on…

  23. Ben Ellison Ben Ellison says:

    Vulcan is definitely not discontinued, Steve, but there is a new Vulcan 7 FS model that directly supports a ForwardScan transducer, which I think significant. I mentioned it here…
    https://staging.panbo.com/archives/2016/01/tbf_icom_m93d_garmin_quatix_3_gnx_wind_imtra_largo_led_and_navico_makes_forwardscan_more_accessible_.html
    …but didn’t get to see one in action at the recent Navico writer’s event. I did get to see the Simrad version of the new 5-inch models that have joined this family of displays and though it doesn’t support FS, it seems a notably able plotter/fishfinder/N2K display for this size and price.
    http://www.bandg.com/en-US/Product-Groups/Vulcan/

  24. Grotty Yachty says:

    Strange…. it’s still on the banner of the B&G home page…… maybe they read my appraisal and thought they better raise their game!!

  25. Ben Ellison Ben Ellison says:

    Today’s new Simrad GO9 XSE is good news, I think, but possibly confusing. Unlike the GO7 and GO5, the GO9 has Ethernet, but it’s only for radar, not networking with other MFDs, black box sonars, etc. But it also has three kinds of sonar processing built right in and lots more:
    http://www.simrad-yachting.com/en-US/Products/GO-series/#products

  26. Ben Ellison Ben Ellison says:

    …and today B&G rolled out the the Vulcan 9, which seems to be the same hardware as the Simrad GO9 but with SailSteer and other sailing features:
    http://www.bandg.com/en-US/Products/Vulcan-9/

  27. andre says:

    Ik ben in bezit van een b&g vulcan 7. Nu heeft mijn stuurautomaat het begeven…..
    Welk onderdeks stuurautomaat adviseren jullie..
    b&g of raymarine ??????
    Hoor verschillende verhalen……

  28. Ben Ellison Ben Ellison says:

    Hi Andre,
    I think Google Translate did well with your question:
    “I am in possession of a b & g vulcan 7. Now my autopilot has it go …..
    Which lower deck autopilot advise you ..
    b & g or raymarine ??????
    Hear different stories ……”
    The reputations of autopilot similar to those of boat batteries, I think: There are lots of strong opinions but hardly anyone has actually used two or more types on same boat in same circumstances.
    That said, I suspect that all modern autopilots perform decently if installed correctly, but often there are bonus features if you use the same brand as your MFD.
    That’s certainly true of the Simrad ap I use and the Simrad NSS evo2 MFDs on my boat. I don’t even use a regular AP control head anymore because all the functions can be done on the MFDs, including deep calibration and setup. I do have an AP keypad for quick course adjustments etc. but it’s not necessary.
    I suggest you check your Vulcan 7 manual to see what the 7 can do with B&G autopilots on the same NMEA 2000 network.

  29. Kees says:

    Hi André, you’re lucky there are Dutch speaking people here that can understand what you are asking…
    For everyone else — his question is:
    I own a B&G Vulcan 7. My autopilot is broken. Which below-decks autopilot do you you recommend? B&G or Raymarine? I have heard of varying experience(s).
    I think both produce excellent autopilots, and that most experiences reflect more on the installation and the installer than anything else. If you get an installer to do it make sure he is experienced with the brand you have selected.
    With that said, if you get a B&G autopilot you will be able to control it from you Vulcan. Depending on your setup you will either have a free extra control station or won’t have to buy a control display.
    You can also buy a Simrad branded AP, they are interchangeable within Navico. I control my Simrad AC42 from my B&G Zeus…

  30. Deb D says:

    Just had my Raymarine C80 die. Looking at a b and g chart plotter. Have an ST control head that is seatalk ng and everything else is nmea 183 and seatlk. Can I make this fit in and talk?

Join the conversation

Your email address will not be published.