TBF: Torqeedo Hybrid, transparent displays, DY Aqua Compact PC, Volvo screen repair & more

Ben Ellison

Ben Ellison

Panbo editor, publisher & chief bottlewasher from 4/2005 until 8/2018, and now excited to have Ben Stein as very able publisher, webmaster, and editing colleague. Panbo is going to the next level in 2019 and beyond.

15 Responses

  1. fixer01 says:

    Good luck with your recovery from the surgery!

  2. Well good luck with the surgery Ben. You of all people should know about exceeding the design life of a object. So take it easy and we are thinking about you.

  3. Randy George says:

    Could not find anything on burn or burnt screen services, Heinz Wahl. Can you give me a website or other contact information ?

  4. Wil says:

    Here’s Heinz’ website: http://bsserv.com/
    …and here’s a video: https://www.youtube.com/watch?v=trKp3kkPrPM

  5. Ben Ellison Ben Ellison says:

    Sorry, Randy, and thanks, Wil! The BSS link is in the entry now. Thanks also Allan and Fixer1; the hand looks is healing well. There will be an “after” photo once the sight is decent.

  6. Norton Rider says:

    Good luck with the Surgery.
    I am a terrible typist and used Dragon Naturally Speaking 16 years ago, when I went back to school for an MBA. There was no way that I could have done all the required work on time without it.
    Back then the software compared what was typed to a dictionary in real time. The problem with that was that the system often used the wrong word in the case of homonyms or when words sounded similar. Careful proofreading was required to avoid errors. Hopefully Nuance has developed a fix for this.

  7. Don Joyce says:

    re: Digital Yacht Aqua Pro Compact PC. Sure looks like an Intel NUC…….
    Cheers
    Don

  8. Bob Muir says:

    re: Digital Yacht Aqual Pro, Ouch, $1,300! That’s quite the premium over an Intel NUC.

  9. Ben Ellison Ben Ellison says:

    Which NUC model has all the specs of the Aqua Pro Compact, including 160GB solid state drive? Please include link, as some readers might want one.

  10. Bob Muir says:

    Ben, I don’t think you can buy a NUC complete. It’s more for the DIYer. If you like PC DIY, you can whip one up for about $500.
    The NUC comes with a 19v AC adapter, but the board inside is good for 12-24v. https://communities.intel.com/thread/49219
    Here’s a link to how to set up your own system:
    http://www.digitaltrends.com/computing/want-to-buy-intels-nuc-heres-everything-you-need-to-know/
    If one is uncomfortable with hardware drivers etc., it might be worth paying the premium to Digital Yacht for a complete system with support.

  11. Bob Muir says:

    Here’s one for $450 that includes 8GB RAM, 240GB SSD and Win7 installed:
    http://www.amazon.com/Intel-Desktop-Generation-Bluetooth-Windows/dp/B010LOBGXO

  12. Leo Starrenburg says:

    Hope the surgery works out fine for you Ben, all the best !
    As for the electric propulsion I’m curious for the battery developments, they are the Achilles heel for this mode. Last fall I sold my collection of working Johnson “egg” 2-stroke 3hp trolling outboards dating from the sixties and bought two electric contraptions to play with. Small trollers of 54 and 86 lbs trust respectivly but even then a sizeable load for my batteries.
    The designer from Torqeedo sums it up perfectly when he compares the ‘clip-on’ battery for their smallest outboard to the volume of gasoline it represents, and thus the need for a super-optimal controller/motor/proppelor combination to make the most of it.
    w fr greetings, Leo

  13. PeterH says:

    I hope the Dupuytren’s surgery goes well for you. I have it too, and I had the Xiaflex injection on my one finger that was driving me crazy. (Mostly it drove me nuts when I’d want to pat my wife on the back and I felt instead like I was poking her with a stick.) It worked astoundingly well and recovery was fast. Have a speedy recovery!
    – Peter

  14. Ben Ellison Ben Ellison says:

    Thanks, Peter! But while I’m hesitant to tell you this, you should know that the very bent ring finger you see in the photo above was treated with Xiaflex about 4 years ago. The procedure worked well and left the finger almost straight, but it did not last. The same was true of the needle aponeurotomy treatment I had on the same finger about 5 years before that. The needle was even easier to endure and recover from, but it did not last. There’s little doubt that I have a particularly aggressive Dupuytren’s in that hand and especially that finger, but I’ve now come full circle. I believe that very invasive surgery by the right surgeon is the lasting solution. I ended up with about 40 stitches with the second and last round of stitch removal this afternoon. My hand still looks it’s been in a rotary mower, but the three main fingers are straighter than they’ve been in 15 years, when I had a disappointing full surgery on the forefinger, and I think that they will stay this way for quite a while because the surgeon took out so much of the offending tissue. Sorry, but after 5 procedures, Xiaflex is at the bottom of my list.

  15. PeterH says:

    Interesting to hear Ben. I think my Dupuytrens has not been so aggressive, but I realize, and was told, that the Xiaflex doesn’t stop the progression of the disease. I was told that the surgery is the ‘gold standard’ for treatment in advanced cases. So…i hope your tissues and 40 stitches heal up well! Enjoy the straight fingers! It’s hard to appreciate until you don’t have it.

Join the conversation

Your email address will not be published.